Home/Support/Support Forum/XCTU cant not discover my XBee S1

XCTU cant not discover my XBee S1

0 votes
Hello, I have a problem with my XBee S1 and I need quick help, please.
i have XBee s1 put on Wireless proto shield, and I connect this board with Further esp32 as following:
TX -> TX
RX -> RX
VCC -> 3V
+ the reset and ground of esp32 together.
when I am trying to discover the XBee by XCTU IT DOESNT SEE it.
even when Iam trying to recover the firmware is giving me an error message
"- Looking for active bootloader... [ERROR]
There is not an active bootloader in the module.
- Resetting and entering bootloader... [ERROR]
PutData1: Sent only 0 of 1 bytes
There is not an active bootloader in the module."

I tried to reset it by connecting the reset with a ground of XBee during the recovery process but still can find it.
what I can do, please.
asked Feb 15 in RF Solutions and XBee by Mohamad-Badr New to the Community (5 points)

Please log in or register to answer this question.

1 Answer

0 votes
The XCTU needs to have direct access to the XBee module. Connecting it via a board that has a processor in between will not work.
answered Feb 15 by mvut Veteran of the Digi Community (14,297 points)
Thanks for your answering but I don't have an adapter for XBee.
can I use it with Arduino Uno, usually that in all the videos are working well?
(uno+ wireless shield)
Yes you can try that.