Home/Support/Support Forum/Indoor Localization using s2c
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Indoor Localization using s2c

0 votes
I am new to Xbee so I need your help. Well I am trying to create an indoor localization system. What I am trying to achieve is explained below.
1. The tags (Xbee S2C) sends out ping every 3 second to the readers (Xbee X2C) around the corners of the room with its Id. [Using RPC]
2. Upon receiving the ping the reader gets the RSSI and forwards its own id, tag id and RSSI to the pc reader (Xbee S2C) [Using RPC]
3. The PC readers keeps receiving the data and forwards it to the localhost where I have triangular approach to calculate the location.

Now the problem is I came to know that S2C doesn't support MicroPython so I need you guys to help me program and achieve what I have explained above.
asked Feb 4 in 3rd Party Python and API development in other Languages by umernaeem217 New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
The best option is to use API mode on the Base unit and send a TX request packet to the loop back cluster ID at the Broadcast address. Then read the RSSI back on each receive packet at the base.
answered Feb 8 by mvut Veteran of the Digi Community (14,297 points)
...