Home/Support/Support Forum/What channels does the xbee use to communicate?

What channels does the xbee use to communicate?

0 votes
Hello,
I have some XBee3 pro, I made a network, a coordinator and 7 routers or end devices, the coordinator sends a broadcast (DL = 0xFFFF) to all the routers so that they receive the information, in the same way of some routers that need to send information, too I do a broadcast. My doubt arises in which channels the communication works, since where I will place these devices they have a system that works on channels 25 and 26 and I would not want to interfere with those channels.

What channels are used for communication between xbee's?

Is it only one channel that is used or are there several?

Is this channel fixed or are they dynamic?

In case those channels (25 & 26) are being used, how could I block those channels in the XCTU so that they are not used?
asked Jan 27 in RF Solutions and XBee by SaulSalBal New to the Community (2 points)

Please log in or register to answer this question.

1 Answer

0 votes
On the Xbee 3, the product is DSSS. That means that it uses one channel for all communications.

That channel is determined by the Coordinator and the SC value.
answered Jan 28 by mvut Veteran of the Digi Community (14,777 points)
...