Home/Support/Support Forum/PAT entry from Inside to outside
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

PAT entry from Inside to outside

0 votes
Hi Guys:

We have a WR21 in port isolate mode. Eth1 is the Internal network and Eth0 is the Internet via an ISP fiber or ADSL router. We are using GPRS as backup.
Eth0 is in DHCP mode so it picks up an ip address from the the ISP supplied router.
What I would like to do is this:
GRE tunnel end on the Digi is 192.168.190.21 and I would like to translate 192.168.190.21:8089 -> 192.168.1.1:80 which is the ISP router configuration page.(of 192.168.1.1:443).
I tried used the static NAT setup but that appears to only work from the outside in whereas I'm going from the inside out.

Does anyone know how to do this?

Cheers,
John
asked Nov 6, 2020 in Digi TransPort Cellular by jserink Community Contributor (74 points)

Please log in or register to answer this question.

...