Hello and good day,
I am almost finished with my pcb design which has an XBee 3 on it. I am planning on routing 3.3V to the Vcc pin (pin 1 on the XBee3 TH, pin 2 on XBee3 MMT). The documentation says I will need 8.2pF, 10uF and 0.1uF capacitor close to the Vcc of the XBee3. So, when I turn on my 3.3v supply with the XBee3 Vcc attached and ground connected, the XBee3 doesn't power on (like it normally does when powered via usb type-b to usb on computer usb port).
My setup is correct though, no?