Home/Support/Support Forum/Corrupted data every few minutes

Corrupted data every few minutes

0 votes
I tend to see corrupted data every few minutes, as seen in the second packet the temp is 670 C all other readings also very high


19:52:17.687 -> RSSI: - 76 DBm , Door 1 Open, Door 2 Open ,-33.11 Degrees C, -27.60 Degrees F, 2.90 % , 0.70 Volts ,
19:52:27.764 -> RSSI: - 0 DBm , Door 1 Closed, Door 2 Closed ,670.70 Degrees C, 1239.27 Degrees F, -3774.81 % , 72.68 Volts ,
19:52:37.833 -> RSSI: - 76 DBm , Door 1 Open, Door 2 Open ,-34.99 Degrees C, -30.97 Degrees F, -0.18 % , 0.62 Volts ,
19:52:47.868 -> RSSI: - 75 DBm , Door 1 Open, Door 2 Open ,-33.11 Degrees C, -27.60 Degrees F, 3.67 % , 0.71 Volts ,
asked Jun 18, 2020 in ZigBee PRO Featureset (and legacy ZNet 2.5) by joinest New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
What is the part number and firmware version of the device you are seeing these from?
answered Jun 18, 2020 by mvut Veteran of the Digi Community (14,297 points)
...