I am current using Xbee S1 and willing to upgrade the firmware to digimesh to allow mesh networking. I was using ND in API frame to search nearby devices in 802.15.4 which returned the device detected and one additional frame in the end(which I checked to confirm that the network search has ended). Since I have migrated to Digimesh I am facing some problems to implement the same. In digimesh if I don’t pass a parameter after ND in the API frame I do not receive any additional frame like 802.15.4 firmware. After I tried adding some time limit parameter and updating, keeping value 0x20 for both, I observed that I am receiving only one device at a time. So if I have 5 devices it happens than many a times my ND response detects the same device multiple times. Same with DN and FN API frames. I know that increasing the time limit would be a better option but the value will differ for different number of devices to be detected. Is there any better solution than increasing the time limit?
Thank you for patient reading