Hi I have Xbee Radios Series 2 (XB24-
, I used them with XCTU 6.3.2 in AT mode without any problem.
Now, because I have to do a star topology network (1 coordinator and 4 end devices)I need to go in API mode.
I started uploading the firmware of the AT coordinator in the first Radio and as a result XCTU 6.3.2 does not see the radio anymore.
However if I send packets to the radio through the UART it responds correctly, so I guess that there must be some problems between my radios and the XCTU when in API mode,
anyone can help?