Home/Support/Support Forum/what is difference between point to multipoint in S1 Xbee 802.15.4 and Xbee S3 ?

what is difference between point to multipoint in S1 Xbee 802.15.4 and Xbee S3 ?

0 votes
What are the pro's and contra's if you compare Point to multipoint in 802.15.4 modules and S3B Xbee-Pro 900 HP?

Are there differences in realiability and speed?

Thanks in advance for y advice.

Wim
asked Apr 3, 2016 in RF Solutions and XBee by smart alarm co ltd New to the Community (8 points)

Please log in or register to answer this question.

2 Answers

0 votes
Yes there are differences. I would strongly recommend you read over the throughput testing sections of their respective manuals.

Keep in mind that that 900 HP can't be used in all parts of the world. It is mostly designed for the America's.
answered Apr 4, 2016 by mvut Veteran of the Digi Community (14,777 points)
0 votes
That answer was really helpfull :-)
answered Apr 6, 2016 by smart alarm co ltd New to the Community (8 points)
The 802.15.4 currently supports a throughput of 80kbps
Supports DIO line passing.

The 900 HP supports a throughput of about 105kbps and doe snot support DIO line passing.

The 802.15.4 uses an external VREF for ADC conversion from 0 - VCC.  The 900 HP uses an internal VREF of either 1.25 or 2.5V.

The 802.15.4 is a peer to peer, point to point, point to multi-point product. Does not support OTA updates.

The 900 HP supports Peer to peer, point to point, point to multi-point, repeater and Mesh networks.  It also supports OTA firmware updates.
...