Home/Support/Support Forum/dgrp_cfg_node not creating tty port in SLES 12
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

dgrp_cfg_node not creating tty port in SLES 12

0 votes
Trying to install the drivers for Digi One SP in SLES 12 operating system. Kernel version is 3.12.28-4-default and the digi driver used is dgrp-1.9-35.src.rpm.

RPM created using rpmbuild is installed fine. But the dgrp_cfg_node command is not initializing any tty devices.

The command executed is dgrp_cfg_node -v init a 1.

No errors are thrown but there are no devices names /dev/ttya00 created.

Any assistance appreciated.
asked Mar 10, 2015 in Serial Servers by nathan New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
Is the Digi One SP unit online? The unit will need to be on-line and accessible by the host in order for the tty device to be created.

If the unit is on-line, please confirm it is reachable by the RealPort host on the proper port by issuing the following commands from the Linux root prompt:

# ping

If you can successfully ping, test the port:

# telnet 771

If an error is seen, you will want to ensure port 771 is open on any corporate firewalls.
answered Mar 17, 2015 by userid0 Veteran of the Digi Community (2,158 points)