Home/Support/Support Forum/Problems with building my first application
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Problems with building my first application

0 votes
Hi, I recently got CC Wi-9C board and wanted to start programming it. When I followed "Building your first application" I got stuck at last step i.e. - running program on target board...
All previous steps works fine (no errors), but when I press "Run" Console outputs:
"make all
make: Nothing to be done for `all'."
and in Progress tab process stuck at 74%

After some time problem message is shown:
"Remote Transfer Error ( Remote path /tmp/ does not exist."

Kubuntu is running on VMware Workstation which is installed on Windows 7 (64) PC...

Any suggestions?

Than You in advance!
asked Nov 22, 2011 in Linux by robcikss New to the Community (2 points)
recategorized Jun 17, 2013 by mcarver

Please log in or register to answer this question.

3 Answers

0 votes

Find my vmware settings..
And from linux environment ping to you board.
If it is pinging network link is fine.

make sure that you have correct IP, gateway & netmask set in env variables in uboot.
answered Nov 23, 2011 by bobthomas13 Seasoned Professional (182 points)
0 votes
Ping did work, but I still can't upload my programm.

When I run Kubuntu from VMWare on XP, everything works fine..
So I gues I'm returning to XP [:)]
answered Nov 24, 2011 by robcikss New to the Community (2 points)
0 votes
I have the same Problem right now! I can use SSH und Serial Communication, so my Module is online.

The upload stuck at 74% and nothing happens. I'M using the ConnectCard™ for i.MX28 with Development Kit.
answered Aug 26, 2015 by Curby New to the Community (2 points)