Home/Support/Support Forum/unable to flash i.mx8m nano
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

unable to flash i.mx8m nano

0 votes
Hi ,

I have recently purchase a evk for i.mx8m nano platform.
Trying to bring up the board following this : https://www.digi.com/resources/documentation/digidocs/embedded/dey/3.2/cc8mnano/yocto-gs_t_program-fw

The uuu script is waiting infinitely for the USB device detection , even though rules step has been done correctly also device is in fastboot mode.

Not sure what is the problem. Still suspecting the u-dev rules, but was not able to find anything there too.
asked Oct 13 in Linux by npal New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
Does it work if you use a microSD card to install the firmware directly in the target?

Have you verified that the cable you are using is working?
answered Oct 13 by Campbell Veteran of the Digi Community (840 points)
Hi ,
Thanks for answer.
It boots successfully via SD card. I am pretty sure I am using molex cable provided in the Kit. Still cannot boot over USB.
...