Home/Support/Support Forum/XB3M1 Python Soft Reboot.
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

XB3M1 Python Soft Reboot.

0 votes
Hello,

I am having a problem with Soft Reboot in Python on my XBee for NB/IoT.

My setting:
- Xbee device, that automatically executes python script to download a datastream.
- It is Connected via Special Xbee adapter and its pins ( 5V, TX, GND)

My Problem:
- In my Script I have Soft Reboot command, because sometimes connection to the internet gets stuck, and that soft reboot helps.
- Soft Reboot works ONLY, when I have a USB cable connected to my Xbee Adapter. Without the USB Cable connected ( only pins connected) Soft Reboot doesnt work.

I cannot figure out why, since Soft Reboot is just a programming feature of Xbee.
asked Nov 16, 2020 in Python by dizont New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
I think you had better take a closer look at your VCC. Per the manual, the NBiOT XBee only supports a VCC range of 3.3 - 4.3. That could be your issue. Also make sure that your Micro Python code is uploaded and set to run on power up.
answered Nov 16, 2020 by mvut Veteran of the Digi Community (13,694 points)
...