Home/Support/Support Forum/Problem sending Transmit Request frame

Problem sending Transmit Request frame

0 votes
Hi. I'm trying to send a message from my router to the coordinator using Transmitting Request Frame (0x10) but without success. Both nodes are in the same network, since before sending this packet I send ND from API Mode and receive a proper respond from the coordinator.

this is my packet

Request_Frame[] = {0x7E,0x00,0X13,0X10,0X01,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X48,0X65,0X6C,0X6C,0X6F,0X92};

As my message ("hello") is going to be transmitted to a coordinator, the destiny address is
0x0000000000000000
and 16 bit address
0x00000000


PS: I don't receive either the packet in the coordinator or the respond in the router
asked Apr 14, 2020 in IEEE 802.15.4 by gomezramones New to the Community (1 point)

Please log in or register to answer this question.

1 Answer

0 votes
No response on transmitter side as well signals that API frame is probably not in proper format.

I would suggest you to make use of "Frame Generator" tool in XCTU to design properly formatted API frames:
https://www.digi.com/resources/documentation/digidocs/90001458-13/default.htm#reference/r_frames_generator_tool.htm

Mathur
Digi Tech Support
answered Apr 15, 2020 by mathur Seasoned Professional (190 points)
...