Home/Support/Support Forum/WR11 Dual Modem Cellular-Cellular Failover
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

WR11 Dual Modem Cellular-Cellular Failover

0 votes
Hello Digi Forum Experts,

I have two WR11 cell modems (close to each other) with two different carriers. The WAN access to site is a Gateway/Firewall PC which only has 1 WAN port and multiple LAN ports. Due to the WAN port limitation I am thinking of addding an unmananaged switch to provide the connection point for WAN-LAN.

What configuration would be required at each modem to provide cellular-cellular failover? We also want to minimize expensive bills on both carriers. Is it possible to have both cellular networks active but have one taking all the traffic?


Regards,
Seb
asked Jan 10 in Digi TransPort Cellular by SebasL New to the Community (1 point)

Please log in or register to answer this question.

1 Answer

0 votes
Hi and welcome to Digi Forums!

If the failover is to be done between two different cellular routers, you would need to implement a mechanism, such as VRRP for both devices to test their links to the outside and make a decision on which should be the "path" (master/backup)

If you want to do failover with dual SIM on each units, we also have mechanisms for testing and falling back (note however that you can only have one SIM card active at a time since there is only one cellular module inside such devices)

You can find several type of failover scenarios in the documentation section of on our support web site here: https://www.digi.com/support/productdetail?pid=5644&type=documentation

Regards

Alex
Digi Technical Support Engineer
answered Jan 10 by alexbdigi Community Contributor (56 points)
...