I am using a connect core 6 ul sbc pro and configured it as a wireless to ethernet bridge as described in this article: https://www.digi.com/resources/documentation/digidocs/embedded/dey/2.4/cc6ul/yocto-bsp_r_wifi-network-bridging_hostapd
I use a static IP address and the subnet mask 255.255.255.0. I can connect to the wlan of the connectcore, but when I try to download data over the bridge it is very slow (200kb/s) or the download does not start at all. When I copy the files over the second ethernet port, which i also defined as part of the Bridge the speed is good.
So I think the problem is related to the wlan.
Does anyon has experience with this problem?