Home/Support/Support Forum/Xbee sending out irrelevant data during good transmissions

Xbee sending out irrelevant data during good transmissions

0 votes
Hello, I have a mesh network sending lots of different types of data to my coordinator. My problem, however, is that some of my radios only transmit the data I want, while others transmit the good data, then 5-10 lines of irrelevant data. I am wondering if I messed something up in the programming, or what the extra data are, so I can get rid of them. Here is an example.

126,0,24,144,0,19,162,0,64,215,112,113,41,22,1,3,11,0,3,136,2,24,2,32,0,0,69,104
126,0,18,146,0,19,162,0,64,215,112,113,41,22,1,1,0,3,0,0,3,121
126,0,18,146,0,19,162,0,64,215,112,113,41,22,1,1,0,3,0,0,3,121
126,0,18,146,0,19,162,0,64,215,112,113,41,22,1,1,0,3,0,0,3,121
126,0,18,146,0,19,162,0,64,215,112,113,41,22,1,1,0,3,0,0,3,121
126,0,18,146,0,19,162,0,64,215,112,113,41,22,1,1,0,3,0,0,3,121
126,0,24,144,0,19,162,0,64,215,112,113,41,22,1,3,11,0,3,136,2,18,2,22,0,0,69,120
126,0,18,146,0,19,162,0,64,215,112,113,41,22,1,1,0,3,0,0,3,121
126,0,18,146,0,19,162,0,64,215,112,113,41,22,1,1,0,3,0,0,3,121
126,0,18,146,0,19,162,0,64,215,112,113,41,22,1,1,0,3,0,0,3,121
126,0,18,146,0,19,162,0,64,215,112,113,41,22,1,1,0,3,0,0,3,121
126,0,18,146,0,19,162,0,64,215,112,113,41,22,1,1,0,3,0,0,3,121
126,0,24,144,0,19,162,0,64,215,112,113,41,22,1,3,11,0,3,136,2,23,2,32,0,0,69,105
126,0,18,146,0,19,162,0,64,215,112,113,41,22,1,1,0,3,0,0,3,121
126,0,18,146,0,19,162,0,64,215,112,113,41,22,1,1,0,3,0,0,3,121
126,0,18,146,0,19,162,0,64,215,112,113,41,22,1,1,0,3,0,0,3,121
126,0,18,146,0,19,162,0,64,215,112,113,41,22,1,1,0,3,0,0,3,121


The frame lengths of 24 are the good data, but for some reason, it continually sends out the 18 length packages. I am wondering if this has to do with JV or JN? I have changed both of them from 0 to 1 and back etc. My other radios, that I have copied their profiles don't do this. While some other radios do.

I guess, what are the in between data packets and how do I get rid of them? Thank you!
asked Mar 13 in DigiMesh Proprietary Mesh Networking by stevenette New to the Community (5 points)

Please log in or register to answer this question.

...