Home/Support/Support Forum/to connecting instrument via rs232 to Digi transport WR31 which cable we use, strait or cross cable?
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

to connecting instrument via rs232 to Digi transport WR31 which cable we use, strait or cross cable?

0 votes
asked Dec 20, 2018 in Digi TransPort Cellular by priyadi New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
Hi

the wr31 is a DCE device

http://ftp1.digi.com/support/cabling/dte_vs_dce.pdf

so it will depend on what you are connecting to

normaly a straight cable if the other end is DTE
this will also depend on the standard and the pinout on the actual interfaces

here is a link to the user guide

https://www.digi.com/resources/documentation/digidocs/90001019/default.htm#references/r_transport_wr31_serial_pinout.htm?Highlight=serial

http://ftp1.digi.com/support/cabling/signals.pdf
answered Dec 21, 2018 by James.Wilson Veteran of the Digi Community (1,225 points)
...