Home/Support/Support Forum/How to setup a digi wr11 xt to communicate with a PLC controller via static IP address
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

How to setup a digi wr11 xt to communicate with a PLC controller via static IP address

0 votes
asked Oct 16, 2018 in Digi TransPort Cellular by Justin Tomlinson New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
Hi

That is a bit of an open ended question.

WR11 is going to get an address from the cell provider
wr11 is going to give an address to what ever is attached to the ethernet port

what ever is attached to the ethernet port will be able to connect to the cell providers network/internet(dependant on plan) through the wr11 not sure why the wr11 is going to talk to the plc controller.

you need to be more specific on what you are trying to do
answered Oct 17, 2018 by James.Wilson Veteran of the Digi Community (1,173 points)
...