Our AnywhereUSB node had crashed on us and we want to know if there are any logs we could check to find the root cause. We have a license dongle plugged in to one of our AnywhereUSB nodes. We were getting errors that we did not have a license so we confirmed the dongle was plugged in but when we opened the AnywhereUSB Configuration Utility, nothing could be found. We noticed the system status light was not bliking on the affected machine but it was blinking on our others that were working properly. The reset button didn't do anything so we unplugged the power cord and pluged it back in. That resolved the issue but we haven't had this for very long so we want to know why it crashed.