Home/Support/Support Forum/It is possible to boot ConnectCore 6UL from SD Card using SPI
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

It is possible to boot ConnectCore 6UL from SD Card using SPI

0 votes
Hello everyone,


Could someone answer me a software and hardware related question?

I am working on a custom board with the CCIMX6UL Application Processor. In the DIGI reference design, the SD Card is connected via 4 Bit Dataline to the processor with the note that camera and SD card can not be used simultaneously during the operation.

For my application exactly this is necessary. So it is possible to use the SPI Interface to boot yocto from the SD card.

Are there other possibilities to use the camera module and the SD simultaneously during operation?

thank you in advance,

TomCC
asked May 17, 2018 in Linux by TomCC New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
>So it is possible to use the SPI Interface to boot yocto from the SD card.

It is generally impossible to boot cc6ul from SD card.
cc6ul has NAND to boot from. or you can implement eMMc like on cc6ul SBC. I am not sure how are you using SD card.
answered May 21, 2018 by LeonidM Veteran of the Digi Community (3,028 points)
...