Home/Support/Support Forum/No yocto image for id 136
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

No yocto image for id 136

0 votes
Hi,
I have development kit SBC pro with ConnectCore 6UL SOM variant 0x04, Industrial Ultralite 528MHz, 1GB NAND, 1GB DDR3, -40/+85C, Wireless, Bluetooth, version 3, ID 136.
By default in DIGI SOM, There is no software installed. I have successfully compiled dey-image-qt follwing below link.

https://www.digi.com/resources/documentation/digidocs/90001547/#task/yocto/t_create_build_projects_yocto.htm%3FTocPath%3DDigi%2520Embedded%2520Yocto%7CSystem%2520development%7C_____2

After completion of build, in deploy folder workspace/ccimx6ulsbc/tmp/deploy/images/ccimx6ulsbc output file is as per below.


boot.scr
dey-image-qt-x11-ccimx6ulsbc-20171205055749.boot.ubifs
dey-image-qt-x11-ccimx6ulsbc-20171205055749.recovery.ubifs
dey-image-qt-x11-ccimx6ulsbc-20171205055749.rootfs.manifest
dey-image-qt-x11-ccimx6ulsbc-20171205055749.rootfs.tar.bz2
dey-image-qt-x11-ccimx6ulsbc-20171205055749.rootfs.ubifs
dey-image-qt-x11-ccimx6ulsbc.boot.ubifs -> dey-image-qt-x11-ccimx6ulsbc-20171205055749.boot.ubifs
dey-image-qt-x11-ccimx6ulsbc.manifest -> dey-image-qt-x11-ccimx6ulsbc-20171205055749.rootfs.manifest
dey-image-qt-x11-ccimx6ulsbc.recovery.ubifs -> dey-image-qt-x11-ccimx6ulsbc-20171205055749.recovery.ubifs
dey-image-qt-x11-ccimx6ulsbc.tar.bz2 -> dey-image-qt-x11-ccimx6ulsbc-20171205055749.rootfs.tar.bz2
dey-image-qt-x11-ccimx6ulsbc.ubifs -> dey-image-qt-x11-ccimx6ulsbc-20171205055749.rootfs.ubifs
dey-image-recovery-initramfs-ccimx6ulsbc-20171205055749.rootfs.cpio.gz.u-boot.tf
dey-image-recovery-initramfs-ccimx6ulsbc-20171205055749.rootfs.manifest
dey-image-recovery-initramfs-ccimx6ulsbc.cpio.gz.u-boot.tf -> dey-image-recovery-initramfs-ccimx6ulsbc-20171205055749.rootfs.cpio.gz.u-boot.tf
dey-image-recovery-initramfs-ccimx6ulsbc.manifest -> dey-image-recovery-initramfs-ccimx6ulsbc-20171205055749.rootfs.manifest
install_linux_fw_sd.scr
modules--4.1-r0.2-ccimx6ulsbc-20171205055749.tgz
modules-ccimx6ulsbc.tgz -> modules--4.1-r0.2-ccimx6ulsbc-20171205055749.tgz
README_-_DO_NOT_DELETE_FILES_IN_THIS_DIRECTORY.txt
u-boot-ccimx6ulsbc1GB-2015.04-r0.imx
u-boot-ccimx6ulsbc1GB.imx -> u-boot-ccimx6ulsbc1GB-2015.04-r0.imx
u-boot-ccimx6ulsbc-2015.04-r0.imx
u-boot-ccimx6ulsbc.imx -> u-boot-ccimx6ulsbc-2015.04-r0.imx
u-boot.imx -> u-boot-ccimx6ulsbc-2015.04-r0.imx
zImage -> zImage--4.1-r0.2-ccimx6ulsbc-20171205055749.bin
zImage--4.1-r0.2-ccimx6ulsbc-20171205055749.bin
zImage--4.1-r0.2-imx6ul-ccimx6ulsbc-20171205055749.dtb
zImage--4.1-r0.2-imx6ul-ccimx6ulsbc-id135-20171205055749.dtb
zImage--4.1-r0.2-imx6ul-ccimx6ulsbc-wb-20171205055749.dtb
zImage-ccimx6ulsbc.bin -> zImage--4.1-r0.2-ccimx6ulsbc-20171205055749.bin
zImage-imx6ul-ccimx6ulsbc.dtb -> zImage--4.1-r0.2-imx6ul-ccimx6ulsbc-20171205055749.dtb
zImage-imx6ul-ccimx6ulsbc-id135.dtb -> zImage--4.1-r0.2-imx6ul-ccimx6ulsbc-id135-20171205055749.dtb
zImage-imx6ul-ccimx6ulsbc-wb.dtb -> zImage--4.1-r0.2-imx6ul-ccimx6ulsbc-wb-20171205055749.dtb


After successful compilation, tried to install yocto image in kit using below steps:

https://www.digi.com/resources/documentation/digidocs/90001547/#task/yocto/t_update_fw_from_usd_yocto.htm%3FTocPath%3DDigi%2520Embedded%2520Yocto%7CSystem%2520development%7CTransfer%2520the%2520firmware%2520to%2520the%2520module%7CProgram%2520the%2520firmware%2520from%2520U-Boot%7C_____2

Issue:

I got below error, when execute command "run recoverycmd" ,all other command are executed successfully:

"** File not found zImage-imx6ul-ccimx6ulsbc-id136.dtb **"

Here In output file there is a file with idname 135 and it ask for 136.

I have not experience with yocto and also used digi kit first time.
asked Dec 22, 2017 in Linux by jignesh New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
by default Yocto project is created for module variant 135.
ConnectCore 6UL SOM variant 0x02: Industrial Ultralite 528MHz, 256MB NAND, 256MB DDR3, -40/+85C, Wireless, Bluetooth
Board: ConnectCore 6UL SBC, version 2, ID 135

You have variant 136. Different memory population option as you see above.

The u-boot images are different, the rest of the images are the same. I suspect you are not using the latest release of DEY. Please update to the DEY-2.2-r3.3 and try again.

$ repo init -u https://github.com/digi-embedded/dey-manifest.git -b refs/tags/2.2-r3.3
$ repo sync -j4 --no-repo-verify
answered Dec 27, 2017 by LeonidM Veteran of the Digi Community (3,622 points)
edited Dec 27, 2017 by LeonidM
...