Home/Support/Support Forum/Communication Xbee S3B - Raspberry
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Communication Xbee S3B - Raspberry

0 votes
Hi,

I'm working with a raspberry pi2 and with a xbee pro S3B, and I need to achieve the communication of two xbee connected to two raspberrys, initially I'm only reading data from one of the xbee, using serial port and the following code:

import serial

ser= serial.Serial('/dev/ttyUSB0', 9600)
print 'Conectando puerto serial'

while True:
incoming = ser.readline().strip()
print 'Recibo: %s' % incoming

I already included the Serial and Xbee-Python libraries in the terminal, but when I run this algorithm, it doesn't show me anything in the terminal, I did the same test with an xbee S2B and i can do the communication.

I would like to know if it is necessary to configure something else or if this communication can't be done.

ASAP

Thanks
asked Nov 1, 2017 in Python by mfarevalo New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
What firmware version are you working with on your XBee modules?
answered Nov 1, 2017 by mvut Veteran of the Digi Community (11,442 points)
I have the XBP6B-Dm Product Family and i've tried with the 8074 Firmware Version
I think you meant the part to be XBP9B-DM. Try setting the AP command to 1 or 2. Most Arduino code wants the XBee to be in API mode.
...