Home/Support/Support Forum/Can XBee Pro S2C and series 2 work together?

Can XBee Pro S2C and series 2 work together?

0 votes
I am using XBee pro in a small network, just sending from peripheral devices into my RPi listening with a XBee series 2. Is this considered a ZNet2.5 network? I now try to expand the network with XBee PRO S2C devices, can't get it working. Is it possible?
asked Oct 11, 2017 in ZNet 2.5 by nilsswed New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
Znet2.5 refers to the type of firmware that is installed on the XBee module. The XBee S2 hardware (Non B or C) support both Proprietary Znet 2.5 and ZB or Zigbee mesh firmware versions. The XBee S2B only supports the ZB or Zigbee versions and the S2C has three different versions and protocols it supports. Zigbee (ZB), Digi Mesh 2.4 and 802.15.4. That is depending on what firmware version is installed. So as long as all of your S2 hardware uses the XBee ZB function sets, they will all talk to each other.
answered Oct 11, 2017 by mvut Veteran of the Digi Community (13,489 points)
Thank you, just confirmed you were right (of course)!