I am using 2 XBee PRO S1 modules. I want them to work in mesh. I am connecting to them using USB->Uart adapters and XCTU software (version 6.3.
. I can connect to the 1st module without any issues. The problem is with the second module, I cannot communicate with it using uart. Also, when the module is starting, the LED's does not act like in the working module. The most concerning one is the ON led that goes off. here is the notation:
RED LED: ON/#SLEEP/DIO9
YEL LED: Associate/DIO5
GRN LED: PWM0/RSSI/DIO10
The right module works correctly, the left one does not, here is a video: https://www.youtube.com/watch?v=Fa_tlR2svu8
What could be the case of this? I would appreciate all help.
Edit: I have noticed that the problematic module starts itself every couple seconds and goes off again. I can then find it in the mesh using the working module, screenshot: https://apptimia-my.sharepoint.com/personal/lukasz_przenioslo_apptimia_com/_layouts/15/guestaccess.aspx?docid=101700d8d92704a85be10ca14e78f111e&authkey=AWcQ6PBSrGCz6Y6ipPNeuG8