I am currently have 2 XBee-PRO 900HP modules with the Grove Development Boards. I'm using one as a base, connected via a USB cable to my laptop and one that is powered by batteries with a voltage stabilizer giving the Vcc required to power it up. I have a 1V to 2.5V signal coming in on Pin 17 (DIO3_AD3) giving an analog voltage signal.
I'm currently using XBeeJavaLibrary and following this script https://github.com/digidotcom/XBeeJavaLibrary/blob/master/examples/io/RemoteADCSample/src/com/digi/xbee/api/remoteadc/MainApp.java to try to get the readings from my remote module.
But it seems to be getting killed at setting the IOConfiguration [remoteDevice.setIOConfiguration(IOLINE_IN, IOMode.ADC);] with a "Status Error".
So I tried using the XCTU to do the same thing by searching for the remote board and changing the value of "D3" to "ADC", but it gave me a Status Error as well.
Has anyone met with this error and knows what it is looking for or how to solve it?
Appreciate any assistance.