Home/Support/Support Forum/Possible to set up a hunt group for for different IP's residing in different VLANs?
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Possible to set up a hunt group for for different IP's residing in different VLANs?

0 votes
I have a client device that has 2 serial ports (port A and port B ) for redundancy. There are 2 redundant servers that this device will query, each having a backup (servers 1-1 and 1-2 in VLAN1 and servers 2-1 and 2-2 in VLAN2). Port A should always query server 1-1 unless there's a failure and port B should always query server 2-1 unless there's a failure. The Digi will need to autoconnect via TCP to establish the initial connection but the serial device will send it's own "keep-alive" message every 60 seconds to which the server will respond with a success or failure response. If port A receives a failure or loses connection, it should attempt server 1-2, then 2-2. The same logic should apply to a failure on port B. Is this possible with either the Digi One or Digi PortServer TS?
asked Jan 27, 2017 in Serial Servers by mweimer New to the Community (0 points)
edited Jan 26, 2017 by mweimer

Please log in or register to answer this question.

...