Home/Support/Support Forum/Install the Yocto firmware into the internal eMMC on CC6
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Install the Yocto firmware into the internal eMMC on CC6

0 votes
Hello,

I read the Digi Embedded Yocto on http://www.digi.com/resources/documentation/digidocs/90001945-13/default.htm#task/yocto/t_program_firmware_yocto.htm%3FTocPath%3DDigi%2520Embedded%2520Yocto%7CGet%2520started%7C_____3.

I would like to install the firmware into the internal eMMC, executing the following commands:

=> fatload mmc 1 $loadaddr install_linux_fw_sd.scr

And i get the error message:

** Invalid partition 1 **



Does any one had experience this issue and how to fix it??

Thank's for all.
Attila
asked Jul 27, 2016 in Linux by klugattila New to the Community (2 points)

Please log in or register to answer this question.

1 Answer

0 votes
Hello, It seems like Micro SD card is not properly formatted.
I suggest that, format the Micro SD with fat32 file system in Linux machine (Ubuntu) then place the decompressed files in the Micro SD card.
Now it should not give any error.

Thanks.
answered Jul 27, 2016 by cpigilam Veteran of the Digi Community (655 points)
Hello,

I try your solution. And try windows and other format. It's no success.

I get the error message again:

** Invalid partition 1 **


Regards,
Attila
Hello, Are you using the U-Boot image that comes with the 82003941_B.zip? If not yet, please use this U-Boot image.
Also check, does the module have proper board version and hardware id by using the below commands.

=> hwid read
=> board_version read

And check image details on memory card.
=> fatls mmc 1

Thanks.
Hello,

I use image file: 82003941_B.zip

hwid read:

Reading HWID:  40600250 b020959f
Year:          2016
Week:          06
Variant:       0x02
HW Version:    0x5
Cert:          0x0 (U.S.A.)
Location:      W
Generator ID:  02
S/N:           038303

board_version read:

 Reading carrier board version...
Board: ConnectCore 6 SBC
Version: 1

fatls mmc 1:
** Invalid partition 1 **

regards,
Attila
It seems like there is some issue with the memory card, try with another micro sd card.
...