We are using USB-Anywhere with a Motorola scanner at several sites.
At one site that we recently integrated, we see that the device is no longer connected and we cannot reconnect until full server reboot (error Code 38).
The exact same issue is reported on several places in the internet, including here:
But also on a lot of other locations, always without solution being mentioned.
We are running:
- Windows Server 2012 R2
- AnywhereUSB 3.82.207
- Driver Digi International 22.214.171.124
- Guest OS is running in VMware ESXi 6.0 with VMware Tools installed
- Model AnywhereUSB/2
- Firmware 126.96.36.199
- Post 1.09.9.32
RealportUSB Host Controller has a exclamation mark saying:
" Windows cannot load the device driver for this hardware because a previous instance of the driver is still in memory. (Code 38) The driver could not be loaded because a previous verison of the driver is still in memory"
The AnyWhereUSB remote hub configuration utility reports that it is connected to the USB Hub and shows the uptime. No other hubs or present and no other computers. The only solution is to reboot the full server which is totally unacceptable. Rebooting the USB anywhere does not help, disconnecting and reconnecting using the remote hub does not work.
Please assist us in this issue