I have 2 Xbee S2(Zigbee) Modules. I have 1 Coordinator AT and 1 Router AT. I also have assigned and configured the coordinator address to the router and the routers address to the coordinator.
I have 2 Embedded system PIC's. I have them communicating "Wired" through the RX and TX ports.
I want to use the XBees to communicate them wireless through the serial port. I have 2 Xbee Explorer Regulated boards so there are 4 outputs.
GND, 5V, Din, Dout
I have hooked up each Xbee to 1 PIC board using Din to TX and Dout to RX.
I am not able to send or receive data. I tried an external power source as well and still nothing.