Home/Support/Support Forum/Not Receiving anything on the realport driver in DotNet
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Not Receiving anything on the realport driver in DotNet

0 votes
We have a series of devices that use the xbee series 1 pro modules. We are trying to add ethernet functionality to connect to the devices using the ConnectPort X2D. I have established communication to the module in X-CTU and configured it to talk with our devices. In X-CTU, I can run node discovery and other AT and remote AT commands just fine so I know the module is talking with the network.

However, in our dot net application (4.0) which up to this point has used usb to serial devices to talk to the xbee network, I cannot see any data being returned from any command. I see the data going out and the LED's on the X2D tell me the response came back, but no serial data received events are firing. My only conclusion is there is some issue with dot net and RealPort or I don't have realport setup properly.
asked Apr 24, 2015 in Realport by ITTS New to the Community (1 point)
edited Apr 24, 2015 by ITTS

Please log in or register to answer this question.

1 Answer

0 votes
Apparently, restarting the PC after installing the RealPort driver fixed the issue.

Sometimes, it's the easiest things that get overlooked.
answered Apr 24, 2015 by ITTS New to the Community (1 point)
...