Home/Support/Support Forum/How much time each Serial Rx buffer and RF Tx Buffer of XBee Series 2 (XB24-B) modem individually can store the data?

How much time each Serial Rx buffer and RF Tx Buffer of XBee Series 2 (XB24-B) modem individually can store the data?

0 votes
Hi
I connected one XBee modem to my microcontroller (Intel Galileo).
This xbee modem collects data from other four XBee modems and send data to Galileo serial port..
So I want to know how much time Serial Rx buffer and RF Tx Buffer of XBee Series 2 (XB24-B) modem individually can store the data...
because my Arduino IDE script (which is running on Galileo) is trying to access this data

I am getting data from the each modules around 22 bytes every 5 seconds...(each of 4 XBee modems send data every 5 seconds )..
I need to access that data without losing any byte..




Thanks
asked Apr 20, 2015 in DigiMesh Proprietary Mesh Networking by swamygovinda New to the Community (2 points)

Please log in or register to answer this question.

1 Answer

0 votes
If you are using hardware flow control and you are using Sleeping End devices, then a parent node can store up to either 2 RF packets or 120 bytes up to 2 1/2 times the SP time frame.
answered Apr 21, 2015 by mvut Veteran of the Digi Community (12,786 points)
...