Home/Support/Support Forum/how to choose the protocol (UDP or TCP) for IP port forwarding with a Digi Transport WR21
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

how to choose the protocol (UDP or TCP) for IP port forwarding with a Digi Transport WR21

0 votes
how to choose the protocol (UDP or TCP) for IP port forwarding with a Digi Transport WR21? Because I use an application that requires port 1200 UDP and TCP 1200-1203.

thank you
asked Mar 19, 2015 in Digi TransPort Cellular by blandin.romain New to the Community (1 point)

Please log in or register to answer this question.

2 Answers

0 votes
Do you have Standard or Enterprise software in it?

If you have standard or Enterprise then you can use the IP Port Forwarding: Configuration - Network > IP Routing/Forwarding > IP Port Forwarding/Static NAT Mappings

If you have Enterprise software you can use the advanced Firewall rules.
answered Mar 20, 2015 by NicholasWilson Veteran of the Digi Community (1,001 points)
0 votes
When you say "Standard or Enterprise software in it" you mean the software in the Transport WR21 or the software that i use?

Thank you.
answered Mar 21, 2015 by blandin.romain New to the Community (1 point)
The software in the TransPort router.  There are two types Basic/Standard and Enterprise.  You can find the difference here: http://www.digi.com/support/kbase/kbaseresultdetl?id=3412
...