I am quite new to Android and Digi and I find problems to download samples from "Digi ESP for Android" development tool to the ConnectCore 6 SBC.
I am able to configure the setting for the ethernet in Android OS but when I try to connect with the SBC I always get the same error "Could not connect with debugging link"
When I write busybox ifconfig in the serial link, I get the following for eth0:
eth0 Link encap:Ethernet HWaddr 00:40:9D:7D:CF:B8
inet addr:10.101.2.177 Bcast:10.101.2.255 Mask:255.255.255.0
inet6 addr: fe80::240:9dff:fe7d:cfb8/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:932 errors:0 dropped:0 overruns:0 frame:0
TX packets:249 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:161804 (158.0 KiB) TX bytes:10674 (10.4 KiB)
In the Android Devices window I configure a Network Device with IP address 10.101.2.177:5555.
What am I doing wrong?
Thank you very much for your help.