Home/Support/Support Forum/remote XBee response to an IS command from coordinator

remote XBee response to an IS command from coordinator

0 votes
I'm using an Arduino Uno to instruct the coordinator XBee to send an IS command (Force Sample) to the router XBee using Frame Type 0x17, a Remote AT Command Request. I'm expecting possibly two responses from the remote: 1) Frame Type 0x97, a Remote Command Response; and 2) Frame Type 0x92, an I/O Data Sample Rx Response. Is it true that I can expect both Frames from the remote, and if so, which Frame is sent to the coordinator XBee first?

Thanks,

Kevin H.
asked Jan 13, 2014 in Interface/Development Boards by kjhart0133 New to the Community (4 points)

Please log in or register to answer this question.

1 Answer

0 votes
Nevermind! I figured it out. It turns out when you send an IS command using Remote AT Command Req., (Frame Type 0x17), the remote XBee responds with a single Remote Cmd Response (Frame Type 0x97) that contains data for all the programmed I/O pins, both digital and analog pins.

This question is answered.

Thanks,

Kevin H.
answered Jan 13, 2014 by kjhart0133 New to the Community (4 points)
...