Home/Support/Support Forum/AnyWhereUSB TS-44 device not found
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

AnyWhereUSB TS-44 device not found

0 votes
I have a new AnywhereUSB TS-44 fresh out of the box.

The digi device discovery cannot find it.

Its plugged into a switch and the switch link led is lit
but the ethernet led's on the digi are not lit (yellow/green).

I have plugged it into two differnet switches, no link led on digi, but link led on switch.

Digi status led cycles thru the following sequence

Yellow
Green
5 x Red
5 x Red
2 x Red


OS is Windows XP 32bit
asked Nov 11, 2013 in USB by rick New to the Community (0 points)
edited Nov 11, 2013 by rick

Please log in or register to answer this question.

1 Answer

0 votes
try to reset the device to factory default though it is new.

Using the Front Panel Reset Button
If the AnywhereUSB cannot be accessed from the Web interface, the configuration can be restored to factory defaults using the Reset button.
1. Power off the AnywhereUSB by unplugging the power.
2. Press the Reset button on the front of the unit.
3. While holding the Reset button, power up the unit.
4. Hold the Reset button for 20 seconds and then release it.

If this doesn't work then contact Digi Technical Support
answered Nov 26, 2013 by sans0909 Veteran of the Digi Community (280 points)
...