Home/Support/Support Forum/Does the DiGi One SP device need to be in a specific mode for Voice traffic? I'm trying to determine DTMF
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Does the DiGi One SP device need to be in a specific mode for Voice traffic? I'm trying to determine DTMF

0 votes
I'm using the Digi One SP device with a Multi-Tech MT9234ZBA-V modem and I'm trying to pass ShoreTel voice traffic with DTMF and DID signaling to our Fax Server. Does the Digi One need to be in a particular Port mode for this to work successfully?
asked Nov 8, 2013 in Realport by mmurphy New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
The Digi One SP is an ethernet-to-serial converter. As far as "mode", this would be more relevant to your serial application, and the way it needs to access the serial data.

Does the application talk to a Windows comm port? If so, you'd want to set the DOSP up for a Realport profile, then install the relevant driver to your Windows Server to create the comm port itself.

Does your app instead need to talk to a particular IP/TCP port instead? If so, you'd likely want to setup the DOSP for TCP Sockets, in a "Server" mode.

Further info can be found in the user manual and/or CLI reference:
http://ftp1.digi.com/support/documentation/90000583_L.pdf
http://ftp1.digi.com/support/documentation/92000304_N.pdf
answered Nov 12, 2013 by michaelt Veteran of the Digi Community (758 points)
Which DiGi One SP profile works best for Fax Server voice calls
...