I need to know how to fill the xmem var section (no bbram) and calculate hot to change limits from segments in physical address space.
I'm using DC 10.70 and RCM4310 module.
this is my .org file:
RCOD | | 00000h | 0000h | 04ae0h | 0c800h |
RESV | | 0c800h | e800h | 01800h | 01800h |
XCOD | | 0e000h | e000h | 01f98h | 02000h |
RCON | | 10000h | 0000h | 03c6eh | 04000h |
RVAR | | 147ach | 47ach | 08054h | 08800h |
RESV | | 1c800h | c800h | 00200h | 00200h |
RESV | | 1ca00h | ca00h | 00100h | 00100h |
WCOD | | 1cb00h | cb00h | 00300h | 00300h |
RVAR | | 1cff8h | cff8h | 00008h | 00200h |
XCOD | | 1d000h | e000h | 59c2ah | 5c000h |
XVAR | | 7f000h | f000h | 00000h | 06000h | <<<
RESV | | 7f000h | e000h | 01000h | 01000h |
RESV | | 80000h | e000h | 80000h | 80000h |
XVAR | x | 1019e4h | 59e4h | 7961ch | 7b000h |
RESV | x | 17b000h | e000h | 05000h | 05000h |
I have used this in project options defines (compile in flash and with separate I&D):
and as you can see in the arrow this segment is not used ...Why? I need to calculate my xvar and xcode and stack available total space.
Why I can't see segments in phys addresses > 80 000 (RAM)?
There are other defines to use? Sometimes compiler say me the out of xmem code space and often in run-time I have xalloc errors.... I have filled the intere memory??
Thanks in advance.