Hello, It's my first time using Xbee modules.
I bought digi XK-Z11-M development kit. So, I have 2 Xbee PRO S2B. One of them have a Wi-Fi RPSMA RF Connector and the other one has a embedded antenna.
I am trying to set up the following configuration:
Node1: xbee coordinator at. with DH and DL of node 2
Node2: xbee router At with DH and DL of node 1.
I followed all the steps indicated at "Getting Started with Xbee RF modules - PARALLAX", and everything went fine except by the terminal part.
Basically, when I type something in the coordinator terminal, the same thing should appear at the router terminal.
Maybe I am having some problems with the antenna. I am not sure if I connected the external one in the right way.
My guess is that both devices are correctly sending information (both leds blink when I type something in their terminal), but the ROUTER is not receiving it...
If somebody could help me with this I would be glad.
Thank you very much,