The default username is root and the default password is dbps. However users can change the password if needed. If you do not know the username or password, you may need to factory default the unit. Verify you know the ip address the AnywhereUSB device was set for then proceed with the factory default process.
Using the Front Panel Reset Button
If the AnywhereUSB cannot be accessed from the Web interface, the
configuration can be restored to factory defaults using the Reset button.
1. Power off the AnywhereUSB by unplugging the power.
2. Press the Reset button on the front of the unit.
3. While holding the Reset button, power up the unit.
4. Hold the Reset button for 20 seconds and then release it