I've made sure I'm looking at the same version. At the bottom of each page it says "If the command is issued via an API frame then the module will return an AT command response API frame with the IO data included in the command data portion of the packet". Good.
I was really looking for an explicit examples of the responses, as in the ZB manual.
For example in the equivalent API command response ZB manual (90000976_F). i.e. page 114, ZigBee IO Data Sample Rx Indicator - Frame Type: 0x92. There is a section at the bottom of the table, in the Frame specific data saying Analog Sample "If the sample set includes any analog input lines (Analog Channel Mask > 0), each enabled analog input returns a 2-byte value indicating the A/D measurement of that input. Analog samples are ordered sequentially from AD0/DIO0 to AD3/DIO3, to the supply voltage."
I realise I asked for the format of an IS response, but the 0x92 format gives me some info about how the 10bit analog values are returned. In fatc what is the format for an "IR" response?
Where is the same definition of the response data format from the Digimesh module? Does the Digimesh module return 0x92 responses?
I guess the information may be inferred but the ZB manual has more examples.