ConnectCore® 6+ documentation portal

CC6+-Shield

This documentation portal serves as a single point of reference for setting up, customizing, and maintaining the Digi ConnectCore 6+ platform. Click here to get started with your ConnectCore 6+ development kit, or explore the main documentation sections below.

The Digi ConnectCore 6+ is a surface-mount system-on-module built on the NXP i.MX6QP application processor. Digi's Yocto Project™-based embedded Linux distribution, Digi Embedded Yocto, serves as the reference distribution for the Digi ConnectCore range of embedded system-on-modules and single board computers. It includes both Digi hardware customizations and software extensions not part of the standard Yocto Project.

Click here to get started

Documentation sections

Digi Embedded Yocto


Learn how to flash and launch Digi Embedded Yocto in your ConnectCore® 6+ device. Build and customize your own Yocto image to fit the needs of your project.

Hardware


Access the hardware reference manual and schematics of the ConnectCore® 6+ and other related devices such as the ConnectCore® 6+ SBC.

Resources


Find all the necessary Digi attachments to work with your ConnectCore® 6+ device. Learn how to perform other specific tasks and get answers to the most common issues.

Back arrow

Back to Embedded documentation home